Page 1
INSTALLATION AND USER INSTRUCTION GUIDE ELECTRIC FIREPLACE with Remote Control Model: 431SL Please read all instructions carefully and retain for future reference...
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions When using this electrical appliance, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to person, including the following: ·This heater must be used on an AC supply only and the voltage marked on the heater must correspond to the supply voltage.
·WARNING: This heater is not equipped with a device to control the room temperature. ·Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
Page 4
· Place the front glass surround over the front of the fire aligning the slots in the brackets at each side of the glass panel with the lugs on the sides of the fire-see Fig.4. Again two people will be required for this operation. DIAGRAM FOR MODEL: EF431SL...
Page 5
OPERATING INSTRUCTIONS Instructions for Use · The appliance can be operated either by the switches located on the top right hand side of the fire or by supplied remote control. Manual Operation · The switches located at the top right hand side of the fire .The standby switch must be first switch on..
Page 6
MAINTENANCE · Warning: Before any maintenance and/or cleaning the exterior of the fireplace, disconnect the unit form the power supply and leave until cooled off. · Remote control battery replacement: this remote control uses 2x1.5V AAA battery. Make sure the batteries are installed correctly in the remote control. ·...
Need help?
Do you have a question about the EF431SL and is the answer not in the manual?
Questions and answers