Battery Charge - Panasonic KX-TG2650CN Operating Instructions Manual

Battery Charge

Insert the handset in the cradle. The ringer/charge indicator will light and
a beep will sound. Charge for about 8 hours before initial use.
•If the battery has been fully charged, the
ringer/charge indicator light will turn from
red to green.
•If you use the handset for a few minutes,
the ringer/charge indicator light will stay
red for a while even if the battery is fully
charged. This is normal.
Battery strength
You can check the battery strength on the handset display while the
handset is on the base unit, while it is in use (making/answering a call
etc.), or after viewing the Caller List or directory items, programming etc.
The battery strength will remain for 5 seconds after using the handset,
then the display will return to the standby mode (p. 9).
The battery strength is as shown in the chart below.
Display prompt
(flashing)
•If the battery has been fully charged, the ringer/charge indicator will light in
green.
Ringer/Charge
Indicator
Battery strength
High
Medium
Low
Needs to be recharged.
11