Tv Aspect; Display Mode; Progresive Scan; Tv Output Select - LG LDA-511 Owner's Manual

DISPLAY
DVD-V

TV Aspect

4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 TV is connected.

Display Mode

Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.

AUDIO

Each DVD disc has a variety of audio output options.
Set the player's AUDIO options according to the type
of audio system you use.

Dolby Digital / DTS / MPEG

Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an Amplifier or
other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM: Select when connected to a two-channel
digital stereo amplifier. DVDs encoded in Dolby
Digital or MPEG will be automatically downmixed
to two-channel PCM audio.
Off (for DTS): If you select "Off", the DTS signal is
not output through the DIGITAL OUT jack.
Downloaded From Disc-Player.com LG Manuals
DISPLAY
TV Aspect 16 : 9
Display Mode Widescreen
Move Select
DVD-A
DVD-V DVD-A
AUDIO
Dolby Digital Bitstream
DTS Bitstream
MPEG PCM
Sample Freq. 48 kHz
DRC On

Vocal

On
Move Select
DVD-V DVD-A DivX
DVD-V

Sample Freq. (Frequency)

If your Receiver or Amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any 96
kHz signals to 48 kHz so your system can decode
them.
If your Receiver or Amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without
any further processing.
Check the documentation for your Amplifier to verify
its capabilities.

Dynamic Range Control (DRC)

DVD-V DVD-A DivX
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
DVD-V
Vocal
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
DVD-A
15