Deleting The Picture Just Taken; Quickview - Kodak DC210+ User Manual

To set the file type, perform the following steps:
1. Set the mode dial to Preferences.
2. Turn on the camera.
The LCD displays the Preferences screen.
3. Press the
erences screen.
4. Press the Do-It button.
The LCD displays the main File Type screen. The current setting is checked ( ).
5. Press a
6. Press the Do-It button.
The main Preferences screen reappears.
The File Type setting is maintained until another setting is selected. This setting does not
change when the camera is turned off.
The Quickview screen turns the camera's Quickview setting on or off. When you take a pic-
ture with Quickview on, the picture momentarily appears on the LCD screen seconds after
the picture is taken.
NOTE: The Quickview option must be activated to use the delete feature available in Cap-
ture mode. Refer to "Deleting the Picture Just Taken" in Chapter 3 for more details.
5-6 KODAK DIGITAL SCIENCE DC210 Plus Zoom Camera User's Guide
button until the File Type icon (shown below) is highlighted on the Pref-
or button until the appropriate option is highlighted.