Advertisement
1. Within 7 meters(22 Feet) from the tV, Press the pairing button
on the ir blaster for about 2 seconds
2. the leD indicator of the ir blaster turns on and the pairing
status is displayed on the tV screen.
* if the paring failure message appears, reboot the ir blaster
and press the pairing button again.
3. When pairing is complete, install the ir blaster within 50 cm (1.5
feet) of the external device(s) within 45 degrees of the of the ir
sensor.
* Do not place any obstacles that may interfere the reception
between the ir blaster and the ir receiver of the external
device.
4. set the Universal Control using the Magic remote control.
[ input list j set the Universal Control]
* Press the pairing button for 5 seconds or more to restart the
pairing.
* Do not throw or roll the ir blaster
oPerating enviroment
1. if multiple set-top boxes and media devices are used or the
media device is in a place where the ir signal from the remote
cannot be received, the ir blaster transmits the ir signals to the
external devices.
.
3
Advertisement
