Kodak CX7310 User Manual page 39

Problem
Picture is too dark or
underexposed.
Camera does not
recognize SD/MMC
card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full
www.kodak.com/go/support
Cause
Flash is not on.
Subject is too far away
for the flash to be
effective.
Subject is in front of a
bright light (backlit).
Not enough light.
Card may not be
SD/MMC certified.
Card may be corrupt.
Card is not properly
inserted in camera.
Camera detected an
error when the card was
inserted or removed.
Storage is full.
Maximum number of files
or folders is reached (or
other directory concern).
Troubleshooting
Solution
Turn on the flash (page
Move so there is no more than 7.9 ft
(2.4 m) between the camera and the
subject.
Use Fill flash (page
position so light is not behind the
subject.
Increase Exposure Compensation
(page 12).
Purchase a certified SD/MMC card.
Reformat the card (page
Caution: Formatting a card deletes all
pictures and videos, including
protected files.
Insert a card into the slot, then push
to seat (page 7).
Turn the camera off, then back on.
Make sure the camera is turned off
before inserting or removing a card.
Insert a new card (page
pictures to the computer
delete pictures (page
Transfer pictures to the computer
(page 28), then format the card or
internal memory (page
Caution: Formatting a card deletes all
pictures and videos, including
protected files.
11).
11) or change your
16).
7), transfer
(page 28), or
18).
16).
32