Kodak EasyShare CX6200 User Manual page 87

Problem
In Review mode,
you do not see a
picture (or the
expected picture)
on the camera
screen.
Picture is too
dark.
Picture is too
light.
Chapter 10
Cause
The camera may not be
accessing the correct
storage location.
Flash is not on.
The subject is too far
away for the flash to
have an effect.
The subject is in front of
a bright light (backlit).
Not enough light.
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
Too much light.
Solution
Check the picture storage
location setting (page
Turn on the flash
Move so there is no more than
7.9 ft (2.4 m) between the
camera and the subject.
Use Fill flash (page
change your position so light is
not behind the subject.
Increase Exposure
Compensation (page
(page 21).
Move so there is at least 1.6 ft
(0.5 m) between camera and
subject.
Decrease Exposure
Compensation (page
12).
(page 21).
21) or
24).
24).
75