Using The Flash - Kodak EasyShare C875 User Manual

Using the flash

NOTE: Flash settings are preset for each picture-taking mode and are not available in all Capture or SCN
modes. When you change to Auto or Red-eye in some of these modes, it becomes the default until
you change it.
Flash mode
Auto Flash The flash fires when the lighting conditions require it.
Fill
Red Eye
Off
Flash-to-subject distances
Wide angle
Telephoto
www.kodak.com/go/support
Press the flash button repeatedly
to change flash modes.
The flash mode appears in the LCD screen.
Description
The flash fires every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is "backlit" (when
light is behind the subject). In low light, hold the camera steady or use
a tripod.
The camera automatically detects and removes red eye from the
picture. (For Red Eye Preflash, see
IMPORTANT: When the flash is set to Red Eye, the camera
cannot take more than 2 pictures in quick
succession. Take more pictures when the Ready
light turns green.
The flash never fires.
2–13.5 ft (0.6–4.1 m) @ ISO 200
2–8.5 ft (0.6–2.6 m) @ ISO 200
Doing more with your camera
page 38.)
21