Components View - Boon FLAIR Instructions For Use Manual

E
IMPORTANT!
KEEP FOR
FUTURE REFERENCE
Failure to follow these warnings, cautions and
the assembly instructions could result in serious
injury or death.
Please read ALL instructions carefully before assembly
and use of this product.
W WARNING
• Prevent serious injury or death from falls or
sliding out.
• ALWAYS secure child using the waist, crotch and
shoulder harness restraint system. The child should
be secured in the highchair at all times by the
restraint system. The tray is not designed to hold the
child in the seat.
• ALWAYS keep child in view while in highchair.
• ALWAYS use highchair on a flat smooth surface.
• ALWAYS use brake when child is in highchair.
• NEVER leave child unattended.
• NEVER use near stairs or in any location where
hanging cords can be reached by child.
• NEVER adjust seat height when child is in highchair.
• NEVER allow child to use footrest to climb in or
out of highchair.
• It is recommended that the highchair be used only
by children capable of sitting upright unassisted.
• Do not use the highchair unless all components are
correctly fitted and adjusted.
• Do not use the highchair near open fire or other
sources of heat/flame.
• Do not use the highchair if any parts are broken,
torn or missing.
• Maximum age: 4 years
• Maximum weight: 50 lbs.
2
W CAUTION
• Adult assembly required.
• Tool required for assembly: Phillips screwdriver
(not included).
• This product contains small parts. Keep small parts
out of children's reach during assembly.
• Assembly components may have sharp points
and edges. Exercise care when unpacking and
assembling product.
• After assembly is complete, properly discard all
packaging materials, including notice on tray liner.
SEAT ASSEMBLY
SUPPORT ASSEMBLY
BASE ASSEMBLY
PARTS
IMPORTANT: Please make sure you have all of the parts
shown on this page before beginning assembly. If you are
missing any parts, please DO NOT return this product to
the store. Please call our customer service department at
888.376.4763 or contact us at info@booninc.com.
Tools required for assembly: Phillips screwdriver
(not included)
Tray liner (x1)
Tray assembly
Seat
Seat pad
Shoulder straps
Waist strap
Buckles
Crotch post
Release handle on
Footrest
Seat base
Upper tube
Seat base cover
Lower tube
Brake Pedal
Base
Height adjustment button
M6 bolt (x5)
M4 bolt (x2)
bottom of tray