Table of Contents
Advertisement
Download software, transfer pictures
When you connect the camera to the computer, it prompts you
to run the KODAK Software Downloader on your computer.
Make sure the computer is connected to the Internet. When
you connect the camera to the computer, the KODAK Software
Downloader automatically runs. Follow the prompts to
download and install KODAK Software.
NOTE: If the downloader does not run, find it here and launch it:
WINDOWS OS: in My Computer
■
■
MAC OS: on your Desktop
Download KODAK Software
To use this camera on more
than one computer
6
1 Turn off the camera.
2 Use the KODAK Camera USB
Cable, Micro B / 5-Pin to
connect camera to computer.
(Use only the cable included
with this camera!)
3 Turn on the camera.
4 After the software is
installed, follow the prompts
to transfer pictures and
videos to your computer.
www.kodak.com/go/camerasw
See the Extended user guide at
www.kodak.com/go/m575support
www.kodak.com/go/easysharecenter
Advertisement
Table of Contents
