Using Both An Eaganmatrix Expander And The Continuum Voltage Converter - Haken Audio Continuum EaganMatrix User Manual

H a k e n A u d i o - E a g a n M a t r i x E x p a n d e r U s e r ' s G u i d e
3.1. The EaganMatrix Expander and Polyphony
The EaganMatrix Expander will triple the
polyphony of EaganMatrix sounds you play on
y o u r C o n t i n u u m F i n g e r b o a r d . I n t h e
Continuum Editor, you control a Base
Polyphony, which is the polyphony when no
Expander is in use. The Editor will display the
true "total DSP polyphony" (three times the
Base Polyphony when an Expander is
connected). An exception is Polyphony 1; this
will result in DSP polyphony 1 even when an
E x p a n d e r i s c o n n e c t e d . Th i s t r i p l i n g
p o l y p h o ny e f f e c t c a n b e d i s a b l e d by
deselecting the "CEE Increases Polyphony"
option in the Polyphony menu.
Total DSP Polyphony (currently 15)
Base Polyphony Menu (currently 5)
4.

Using both an EaganMatrix Expander and the Continuum Voltage Converter.

If you have a Continuum Voltage Converter (CVC) you must Connect your CVC to Data Port 4 on the Expander.
The CVC will not work if you connect it directly to your Continuum Fingerboard.
to Continuum Voltage Converter's "In"
You must power on your CVC whenever it is connected; the LEDs flash violet if a CVC is connected without
power.
P a g e  5