GMC Equinox Manual page 89

Pairing a Phone
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Pair. The system responds
with Please search for
Bluetooth devices on your
phone. Confirm or enter
number.
3. Start the pairing process on the
phone to be paired.
4. Locate and select the device
named after the vehicle make
and model in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided or to confirm the
six-digit code matches. The
system responds successfully
paired.
5. Repeat Steps 1 4 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Device List.
Deleting a Paired Phone
If the phone name to delete is
unknown, see Listing All Paired
and Connected Phones.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Device List.
3. Say Delete Device.
Infotainment System
4. The system responds with: To
delete a device, please touch its
name on the screen. Select the
device to delete on the display
and it will be removed.
To cancel this command, press
on the steering wheel control or
press the BACK button on the
radio faceplate.
Connecting to a Different Phone
or Device
To connect to a different cell phone,
the system looks for the next
available cell phone. Depending on
the cell phone to be connected, this
command may need to be repeated.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Bluetooth.
3. Say Change Phone.
To select a device, press
the name on the display.
89
/