Video Screens - GMC Equinox Manual

48 Infotainment System
3. A third time to change the left
video screen source to the
auxiliary device and the right
video screen to the DVD player.
4. A fourth time to change the
source of both video screens to
the DVD player.
How to Change the RSE Video
Screen Settings
To change the screen display mode,
brightness, and language from the
remote control:
z
1. Press .
n q p o
2. Use , , , and
select the settings.
z
3. Press again to exit.
Audio Output
Audio from the DVD player or
auxiliary inputs can be heard
through the wireless headphones or
vehicle speakers.
The RSE system transmits the
audio signal to the wireless
headphones if an audio signal is
available. See Headphones earlier
in this section.
The front seat passengers can listen
to audio from the A/V jacks through
the vehicle speakers by selecting
Rear AUX as the source on the
radio.

Video Screens

The video screens are in the back
of the driver and front passenger
seats.
r
to
To use the video screen:
1. Press the release button on the
seatback console.
2. Move the screen to the desired
viewing position.
Push the video screen down into its
locked position when it is not in use,
the screen turns off automatically.
Only the left RSE seatback console
contains the infrared transmitters for
the wireless headphones and may
be visible as eight illuminated LEDs.
These LEDs are not on the right
video screen. Both seatback