Vauxhall Corsa 2010.5 Owner's Manual page 149

148 Vehicle care
7. Engage bulb holder in bulb
housing, ensuring that it properly
engages.
8. Ensure that the bulb holder seal is
positioned as illustrated.
Ofrecido por www.electromanuales.com
9. Insert bulb housing in vehicle
body, tighten securing nuts by
hand. Engage plug connector.
Close cover.
After bulb replacement, check the tail
lights for proper functionality: switch
on the ignition, operate the brake,
switch on the side lights.
3-door passenger vehicle, van
1. Open side cover.