Maintenance And Cleaning; Maintenance And Cleaning Fluff Filter; Sensor (Models Equipped With A Sensor); Condenser) - Beko DRVS 73 W Installation & Operating Instructions And Drying Guidance

8

Maintenance and cleaning

Fluff filter
Lint and fibres released from the laundry
to the air during the drying cycle are
collected in the "Fluff Filter".
C
Such fibre and lint are generally
formed during wearing and washing.
C
Always clean the filter after each
Drying process.
C
You can clean the filter and filter area
by vacuum cleaner.
For Filter cleaning;
1. Open the cover
2. Remove the fluff filter by pulling it up
and open the filter.
3. Clean lint, fibre, and the fluff by hand or
with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
C
Clogging may arise on the filter
surface after using your machine for
some time; if this occurs, wash the
filter with water and dry it before using
again.
Sensor (models equipped with
a sensor)
There are humidity sensors in your
machine that detect whether the laundry
is dry or not.
For sensor cleaning;
1 Open the cover of your machine.
2 Allow the machine to cool off if drying
has been carried out.
3 Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents
or substances alike when cleaning as
these might cause fire and explosion!
EN
22