6-Way Tuning System - Akai AT-93/L Operator's Manual

6-way Tuning system
This quartz synthesizer tuner incorporates a 6-way
tuning system.
Before tuning in a station
Set the amplifier's input select button to the
TUNER position.
Method
*
Before tuning in a station manually or automati-
6
cally, remember to select the band with the
BAND select button.
*
When using a preset station button for tuning,
make sure that you have already memorized a
station.
Operation
Manual tuning Set the SCAN MODE to MANUAL with the SCAN MODE button,
then repeatedly press the TUNING UP > or DOWN
<
button until
a station is tuned in.
*
To quickly change the frequency, depress the TUNING button
continuously. For fine tuning press the button repeatedly.
Automatic tuning
Set the SCAN MODE to AUTO with the SCAN MODE button, then
press the TUNING UP
<
or DOWN> button once.
Preset station tuning Press the preset station button once or twice depending on which
preset station you want to listen to.
Automatic preset scan tuning Press the PRESET SCAN button once. Automatic preset station
scanning is engaged. To stop at a preset station, press the
PRESET SCAN button again or press the PRESET STATION
button that holds the station you want to listen to.
Manual preset station tuning Repeatedly press the PRESET SCAN button.
Sequential station call tuning with an Make sure you have tuned in and memorized a station at the
optional audio timer PRESET STATION number 20 before turning off the power. For
operation details see page 7.
How to memorize a preset station
Select the band with the BAND button.
AKAI ... _, .. ,. __ ,_ ... "
Notes
• As well as memorizing the band and frequency
of a preset station, the tuner's memory system
also memorizes the ANTENNA, IF BAND,
HI-CUT and FM AUTO button's modes during
preset station memorization.
• If a PRESET STATION button is not pressed
within 5 seconds after the MEMORY button is
pressed, the memory operation will be cancelled
automatically.
• If you are using timer controlled preset station
tuning (Sequential station call function), make
sure you have memorized the desired stations
at the PRESET STATION numbers 20, 19 and
18 (See page 7).
Tune in a station you want to memorize with
the TUNING UP
<
or DOWN> button.
Press the MEMORY button as follows;
Press the button once ..................... .
To memorize channels 1 to 10. The M in-
dicator and 1-10 display will appear on
the FL display.
Press the button twice .................... .
To memorize channels 11 to 20. The M in-
dicator and 11-20 display will appear on
the FL display.
Press the button three times ............... .
To cancel the memory operation. The
normal tuning display will appear.
Within 5 seconds
Press the PRESET STATION button where
you want to memorize the station.
When pressing a PRESET STATION button,
it's indicator will light up.
After completing a preset station memorization, to
memorize more stations, repeat the above steps 1
through 4.