Troubleshooting
Status
Picture is too dark
Picture is too light
Pictures that have
KODAK PERFECT
TOUCH Technology
applied (twice) are
of lower image
quality.
46
Solution
■
Reposition the camera for more available light.
■
Use Fill flash
(see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications, starting on
page
48.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications, starting on
page
48.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
If PERFECT TOUCH Technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer
(or on a KODAK Picture Kiosk).
NOTE: PERFECT TOUCH Technology is automatically applied to pictures
taken in Smart Capture mode.
11) or change your position so light is not
(see page
11).
www.kodak.com/go/support
(see page
17).
(see page
17).