Troubleshooting - Kodak EASYSHARE M5350 Extended User Manual

7

Troubleshooting

Camera
Status
Camera does not
turn on/off or function
LCD is too dark.
Short battery life
Flash does not fire
Memory card is almost
or entirely full
You cannot take a
picture
Pictures remaining
number does not
decrease after taking a
picture
Memory card not
recognized or camera
freezes with card
46
Solution
■
Make sure the battery is charged and installed correctly
page 1).
■
Adjust the LCD Brightness setting in the Settings menu
page 41).
■
Make sure the battery is charged
■
Limit the time you review pictures/videos on the camera LCD.
■
Purchase a spare battery at www.kodak.com/go/accessories.
■
The flash does not fire in all modes. Change modes as needed
(see page 14).
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Insert a new/charged battery
■
Memory is full. Transfer pictures to the computer
delete pictures (see page
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Card may be corrupted. Format the card in the camera
page 42).
■
Use another memory card. Only SD or SDHC Cards are supported.
(see page 1).
(see page
(see page 22) or insert a new card.
(see page
(see page 1).
22), or insert another card.
www.kodak.com/go/support
(see
(see
43).
8).
(see page 43),
(see