Connecting to
speakers
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
Banana
plug
Banana
plug
CM9940-FS_DAUSLLK_ENG.indd 13
Speaker
cable
Speaker
cable
Attaching the high channel
speakers to the unit
1. Loosen the knob by turning it counterclockwise.
2. Insert the bare part of the wire into the hole in
side of each terminal.
3. Tighten the knob by turning it clockwise to
secure the wire.
Cable
HIGH CHANNEL
Black stripe
Connect to 3
Transparent
Connect to 2
Attaching the low channel
speakers to the unit
1. Remove a protective cab.
2. Insert the banana plug into the corresponding
terminal.
Banana plug
LOW CHANNEL
Black
Connect to 3
Red
Connect to 2
Connecting
13
2
2013-12-24 �� 5:56:22