Sharp Aquos LC-46SE94U Operation Manual page 33

Example
On-Screen Display Menu
5
Press ENTER to start checking the data in the
USB memory device.
6
During the data checking, "Checking" blinks.
• The current version of the TV software and the version
of the update file on the USB memory device are
displayed. To update the TV software with the update
file, select "Yes", and then press ENTER.
• If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
@-
32
7
Press ENTER to start updating.
• The screen becomes dark for a while until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
Example
• If you accidentally unplugged the AC cord or removed
the USB memory device, reinsert the USB memory
device and plug in the AC cord. The update process is
restarted.
8
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
• If the update has failed, check the file in the USB
memory device and try Software Update again.
Failed to complete update
Retry Software Update
If system Update fatls again,
contact the customer service center
9
After the screen shown below is displayed, press
ENTER.
System software was
successfully updated
Remove the USB memory device •
---
10
Remove the USB memory device.