Attaching The Stand - Sharp Aquos LC-46SE94U Operation Manual

QUICK REFERENCE
• LC-46SE94U1LC-52SE94U
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confirm that there are 4 screws and a screwdriver
3
Connect the ends of the cables to the speaker
supplied with the speaker unit. terminals as shown below.
, ,
"~
b
~~~~e~~I~~~
leads to the speaker terminals of the
2
Insert the projections on the speaker unit into the
corresponding slots on the TV, then fasten the screws.
1-
Sc'owd",e,
T-Screws
0---'6''4''
2
-~ \:!I
"'
. .
:/'
BlaCki iRed
··I~I·
~~;~Red
Black~ ~
~~e
mm
• To detach the speaker unit, perform the steps in reverse
order.
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Emm
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are 12 screws (all the same size)
3 CD
Insert the stand into the openings on the
supplied with the TV. bottom of the TV.
~~~~SSS~~~,GU~H;'~
®
Insert and tighten the 4 screws into the 4 holes
"[ IT IT "["["[ IT "["["["["[ on the rear of the TV.
2
@-6
- - - H e x key
mm
• To detach the stand, perform the steps in reverse order.