Installation - ADLINK Technology NuDAM ND-6520 User Manual

2.3.

Installation

Software Utility
Software is not necessary for this module.
Equipments for Installation
A host computer with RS-232 port
RS-232 cable (DB-9 female)
DC Power supply (+10V~+30V) (NDP-243u is recommended)
Wires (shielded and grounded is recommended)
Installation Procedure
1. Make sure the host computer is power off.
2. Use RS-232 cable to connect NuDAM-6520 with host computer.
3. Wire the power supply to NuDAM. Note that the power supply
should meet the specification.
4. Wire other NuDAMs.
Application Wiring
The Figure 2-1 shows the application wiring of NuDAM-6520.
Host
Computer
Local Power Supply
+10 V to +30 V
+Vs
2-8 NuDAM-6520
RS-232
+Vs
GND
Figure 2-1 Application wiring of NuDAM-6520
NuDAM-6520
RS-232/RS-485
Converter
DATA +
DATA -
GND
NuDAM
module
+ DATA
- DATA
+Vs GND