GMC Sierra 2015 Owner's Manual page 69

3-8 Seats and Restraints
If the Auto Recall feature is enabled
in the vehicle personalization menu,
memory 1 or 2 positions are
recalled in the following ways:
Press on the RKE transmitter
and open the driver door.
Press on the RKE transmitter
when the driver door is
already open.
See Vehicle Personalization on
page 5-46.
To stop recall movement, press one
of the memory, power mirror or
power seat controls; or press the
adjustable pedal control (if
equipped).
RKE Transmitters are not labeled
with a number. If your memory seat
position is stored to 1 or 2 but
this position is not automatically
recalling, then change the stored
position or switch RKE transmitters
with the other driver.
Easy Exit Recall
If programmed on in the vehicle
personalization menu, the easy exit
feature automatically recalls the
previously stored (Exit) position.
See Storing Memory Positions
listed previously. See also Vehicle
Personalization on page 5-46.
Easy exit recall automatically
activates when one of the following
occurs:
The vehicle is turned off and the
driver door is opened within a
short time.
The vehicle is turned off with the
driver door open.
Obstructions
If something has blocked the driver
seat and/or adjustable pedals while
recalling a memory position, the
recall may stop. Remove the
obstruction. Then do one of the
following:
For manual or automatic recall
positions, press and hold the
appropriate manual control for
two seconds. Try recalling again
by pressing the appropriate
memory button.
For exit recall position, press
and hold the appropriate manual
control for the exit feature not
recalling for two seconds. Then
try recalling the exit position
again.
If the memory position is still not
recalling, see your dealer for
service.