Tevion 1923DT Quick Start Manual

Tevion 1923DT TV/DVD Quick Start Guide

Insert the batteries

• Insert two AAA size batteries in the remote control, ensuring
that the polarity is correct, as shown.

Connect the set

• Connect the aerial plug to the
the back of the set.
• Connect the mains adaptor cable to the
socket on the back of the set,
DC-12V
then connect the mains cable between the
adaptor and the mains supply. The indicator
on the front of the set will show red.
• To switch on, press the
the top of the set, or aim the remote control
at the indicator on the front of the set, and
press the red
POWER
on the front of the set will show blue.

Tune the TV

The first time you switch on the set, you should see the
Installation Guide screen:
• Use the and
correct
Language
• Press the button to highlight
button.
OK
If you do not see the Installation Guide screen:
• Press the button on the remote control. The
MENU
menu is displayed.
• Press the button to highlight
button.
OK
When you see the Auto Tuning box:
• Use the and
in Eire should select 'UK', which uses the same TV bands.)
• Press the button to highlight
button. The TV will automatically search for any digital and
analog TV and radio stations that are available in your area.
This may take several minutes.
If the stations are not in the order you would prefer, or if there are stations you do not want
to watch, then see
Using the Channel menu
programme list.
socket on
RF
button on
POWER
button. The indicator
buttons on the remote control to select the
.
Auto Tuning
Auto Tuning
buttons to select the correct
, then press the
Start
, then press the
CHANNEL
, then press the
. (Users
Country
OK
in the User Guide, to find out how to edit the
1
DC-12V
RF