Epson PowerLite Pro G6070W User Manual page 215

Power light Lamp
light
Flashing red Off
Red Off
Red Flashing
red
On Off
Temp light Filter light Status and solution
Flashing Off Projector is too hot.
orange
• Make sure that the vents and air filter are
• Clean or replace the air filter.
• Make sure the environmental temperature
Red Off Projector has overheated and turned off.
Leave it turned off to cool down for five
minutes.
• Make sure that the vents and air filter are
• Clean or replace the air filter.
• If operating the projector at high altitude,
• If the problem persists, unplug the
Off Off Lamp has a problem.
• Check to see if the lamp is burned out,
• Make sure that the vents and air filter are
• If operating the projector at high altitude,
• If the problem persists, unplug the
Off Flashing It is time to clean the air filter.
green
215
not clogged with dust or obstructed by
nearby objects.
is not too hot.
not clogged with dust or obstructed by
nearby objects.
turn on High Altitude Mode.
projector and contact Epson for help.
broken, or installed incorrectly. Reseat or
replace the lamp as necessary.
not clogged with dust or obstructed by
nearby objects.
turn on High Altitude Mode.
projector and contact Epson for help.