gobandit Action Camera User Manual page 7

2. Flat Surface Mount
You can mount the camera to the top or side of your helmet, or directly
onto your motorcycle or race car. For best results make sure to clean the
surface of your gear (e.g. your helmet) with the alcohol pad, and mount
at room temperature. If possible, attach the mount to your gear 12 hours
before use. You can easily rotate the position of your camera by unfasten-
ing the mounting screw with the edge of a coin.
3. Universal / Tripod Mount
You can mount the camera using any third party mount e.g. a tripod,
telescope arm or RAM mounts supporting a 1/4" diameter, 20 threads per
inch (1/4-20) screw.
MOUnT RAILS
Once the mount is fixed, slide the camera on the mount rails until
completely forward:
mount rails
camera rails
Note: Please visit www.gobandit.com/shop for purchasing further
mounts, e.g. handle bar mount, roll bar mount, board mount, etc.
BEFORE USING THE CAMERA WITH ANY MOUNT IN YOUR ACTIVITIES,
DETERMINE IF THE HOLDING POWER OF THE MOUNT IS APPROPRIATE
AND SAFE. THE CAMERA COULD CAUSE INJURY OR HARM IN THE EVENT
THAT IT COMES LOOSE FROM THE MOUNT. GOBANDIT DOES NOT
WARRANTEE LOST OR DAMAGED CAMERAS.
7