Table of Contents
Advertisement
Resetting the lamp timer
13.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER.
The Lamp Settings page appears. Highlight Reset Lamp Timer. A warning
message appears asking if you want to reset the lamp timer. Highlight Reset and
press MODE/ENTER. The lamp time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
50
Maintenance
Downloaded From projector-manual.com BenQ Manuals
Advertisement
Table of Contents
