Table of Contents
Advertisement
Controls and functions
Projector
1.
Focus ring
Adjusts the focus of the projected image.
2.
Zoom ring
Adjusts the size of the image.
3.
Top IR remote sensor
4.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5.
POWER
Toggles the projector between standby
mode and on.
6.
Left/
Decreases the projector volume.
7.
MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
8.
ECO BLANK
Used to hide the screen picture.
9.
POWER indicator light
Lights up or flashes when the projector is
under operation.
10. TEMPerature warning light
Lights up red if the projector's
temperature becomes too high.
10
Introduction
Downloaded From projector-manual.com BenQ Manuals
1
2
3
4
5
6
7
8
11. LAMP indicator light
12. AUTO
13. Keystone/Arrow keys (
14.
15. SOURCE
9
10
11
12
13
14
15
16
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
Automatically determines the best picture
timings for the displayed image.
Down)
Manually corrects distorted images
resulting from an angled projection.
Right/
Increases the projector volume.
When the On-Screen Display (OSD)
menu is activated, the #6, #13, and #14
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
Displays the source selection bar.
/ Up,
/
Advertisement
Table of Contents
