Panasonic KX-TG9372C Operating Instructions Manual page 40

TG9372C(e).book Page 40 Friday, August 22, 2008 3:28 PM
Voice Mail Service
Turning VM tone detection on/off
The default setting is "On".
1
{MENU} i {#}{3}{3}{2}
2
{V}/{^}: Select the desired setting.
i {Save} i {OFF}
Listening to Voice Mail
messages
The unit lets you know that you have
new Voice Mail messages in the
following ways:
– "New Voice Mail" is displayed on
the handset.
– The message indicator on the handset
flashes slowly if message alert feature
is turned on ("Message alert"; page
38).
1
Press {C}, then press {VM} within
15 seconds.
OR
{MENU} i {#}{3}{3}{0}
L The speakerphone turns on.
2
Follow the pre-recorded
instructions.
3
When finished, press {OFF}.
Note:
L If {VM} is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 39).
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {OFF}
until the handset beeps.
L If your Voice Mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your Voice Mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
40
to listen to Voice Mail messages, you
have to dial your access number
manually.