AirTurn BT-105 User Manual page 11

7. Touch or click the listing when it appears and it will connect
after another few seconds.
The BT-105 is connecting but not turning pages
1. Check the mode. This is the most common problem. (It can
be inadvertently changed while turning on the BT-105 by
holding down the footswitch plugged into port 1.)
To change the mode to the default mode 3:
A. Turn off the BT-105.
B. With one hand, hold down the right footswitch, (the one
plugged in closest to the USB port.)
C. Turn on the BT-105.
D. Release the footswitch and power switch after 1 second
or after you see the first green blinking light.
E. When you see a red blink, three greens and a red blink
the mode is changed.
2. Make sure you are using an app that supports the BT-105.
(Check the AirTurn website. http://airturn.com/apps)
3. Check the application instructions to make sure you have
the application set up for the AirTurn.
4. On an iOS device, be sure you are not running too many
applications. See your iOS instructions for closing apps.
5. Lastly, on an iOS device, try resetting the network. (Note:
this procedure will cause you to lose network password
settings and they will have to be re-entered.) Select General,
11