Asus M5A97 Manual page 51

SPDIF Out Type [SPDIF]
[SPDIF] Sets to [SPDIF] for SPDIF audio output.
[HDMI] Sets to [HDMI] for HDMI audio output.
2.5.7 APM
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Device [Disabled]
Allows you to use PS/2 device to turn on the system. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By PME Device [Disabled]
[Disabled] Disables the PME to wake up from S5 by PCI/PCIE devices.
[Enabled] Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By Ring [Disabled]
[Disabled] Disables to power up the computer when the external modem receives a
call while the computer is in Soft‑off mode.
[Enabled] The computer could be powered up when the external modem receives a
call while the computer is in Soft‑off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and System
[Enabled]
Time will become user‑configurable with set values.
ASUS M5A97 PLUS 2-23