Ford Five Hundred 2005 Owner's Manual page 62

Driver Controls
4. Determine your magnetic zone by
referring to the zone map.
5. Press and hold the RESET until
the message center display changes
to show the current zone setting.
6. Release the RESET control, then
slowly press RESET down again.
7. Press the SETUP control
repeatedly until the correct zone
setting for your geographic location
is displayed on the message center. To exit the zone setting mode press
and release the RESET control.
8. Press the RESET control to start
the compass calibration function.
9. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h])
until the SLOW CIRCLES TO
CALIBRATE indicator changes to
CALIBRATION COMPLETED. This
will take up to three circles to
complete calibration.
10. The compass is now calibrated.
62
2005 Ford Five Hundred (500)
Owners Guide (post-2002-fmt)
USA_English (fus)
3 2 1
4
5
6 7 8 9 1011
15
14
13
12