Changing The Remote Control Battery - Ford FIESTA Owner's Manual

Changing the Remote Control
Battery
Make sure that you dispose of
old batteries in an
environmentally friendly way.
Seek advice from your local authority
regarding recycling.
Remote Control With a Folding Key
Blade
1. Insert a screwdriver as far as possible
into the slot on the side of the remote
control, push it toward the key blade
and remove the key blade.
2. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
Fiesta (CCN) Vehicles Built From: 21-03-2014, Vehicles Built Up To: 03-08-2014, CG3582en enGBR, Edition date: 02/2014, Second Printing
Keys and Remote Controls
3. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
4. Carefully remove the battery with the
screwdriver.
5. Install a new battery (3V CR 2032) with
the + facing downwards.
6. Assemble the two halves of the remote
control.
7. Install the key blade.
28