2. Remove the wiper blade.
3. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
Rear Window Wiper Blade
1.
Lift the wiper arm.
2. Slightly rotate the wiper blade from the
wiper arm
3. Disengage the wiper blade from the
wiper arm.
4. Remove the wiper blade.
5. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
REMOVING A HEADLAMP
1.
Open the hood. See Opening and
Closing the Hood (page 148).
Fiesta (CCN) Vehicles Built From: 21-03-2014, Vehicles Built Up To: 03-08-2014, CG3582en enGBR, Edition date: 02/2014, Second Printing
Maintenance
2. Remove the screws.
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the retaining clips.
162