Specifications; Making A Call; Using Voice Prompts; Resetting - Samsung HM3300 User Manual

Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an MP3 player.
The process of connecting to a music device is the same as for connecting with a phone.
When connected to both devices (phone and music device) you can make or receive a
call on the phone while listening to music from the music device.
You cannot control playback using your headset.
Reconnecting the headset
If the connection is lost while in use:
•
Press the Talk button on the headset or use the Bluetooth menu on your phone.
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on. If the Multi-point feature is activated, your
headset will attempt to reconnect to the two most recently connected devices.
This feature may not be supported on some devices.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone.
Using call functions
•
Available call functions may differ from phone to phone.
•
Some functions are only available when using the Hands-Free profile.

Making a call

Redialling the latest number
To redial the last number dialled on the primary phone:
•
Press and hold the Talk button.
To redial the last number dialled on the secondary phone:
•
Press the Talk button twice.
Some phones open the call log list on the first press of the Talk button. Press the
Talk button again to dial the selected number.
Dialling a number by voice
Press the Talk button.
This function is only available on the primary phone.
Answering a call
Press the Talk button to answer a call when a call comes in.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
If you receive calls on both connected phones at the same time you can only
answer or reject the call on the primary phone.
Ending a call
Press the Talk button to end a call.
Options available during a call
You can use the following functions during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
You will hear a beep when the volume level of the headset reaches it's lowest or
highest level.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that the
person with whom you are speaking cannot hear you. When the microphone is turned
off, the headset beeps at regular intervals. Press and hold the Volume up or down
button again to turn the microphone back on.
Transferring a call from the phone to the headset
Press the Talk button on the headset to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
Answering a second call
•
Press the Talk button to end the first call and answer a second call.
•
Press and hold the Talk button to place the first call on hold and answer a second
call. To switch between the current call and the held call, press and hold the Talk
button.

Using voice prompts

Voice prompts will inform you about the current status of the headset and usage
instructions. If you can't hear any voice prompts, make sure the voice prompt feature is
turned on.
Turning the voice prompts on or off
To turn the voice prompts on
In Pairing mode, press and hold the Volume up button for 3 seconds. You will hear
"Voice prompt is on".
To turn the voice prompts off
In Pairing mode, press and hold the Volume down button for 3 seconds. You will hear
"Voice prompts is off".
Changing the language
Supported languages may vary depending on the region in which it was purchased.
•
In Pairing mode, press and hold both volume buttons simultaneously to select a
language.
-4-
List of voice prompts
Status Voice prompt
When you turn the headset
"Power on" or "Power off"
on or off
When you enter Pairing "Ready to pair. Search for the headset from the
mode Bluetooth menu"
When you turn Multi-point "Multi-point mode is on" or
feature on or off "Multi-point mode is off"
When you connect the
"Device is connected" or "Two devices are connected"
headset to the devices
When you disconnect the
"Device is disconnected"
headset from a device
When you reject or end
"Call terminated"
a call
* Voice prompt content may vary depending on the region in which it was purchased.
Resetting the headset
When the headset is paired with a device, it automatically saves connection and feature
settings, such as the Bluetooth address or device type of the mobile phone.
If you want to reset the connection settings in the headset:
•
In Pairing mode, press and hold both Volume buttons and Talk button at the same
time for 3 seconds. The blue indicator light flashes 4 times.
When you reset the headset, all connection settings in the headset will be deleted
and the connection with your phone will be lost. In order to use the headset, you
will have to pair it again.
Appendix

Specifications

Item Specifications and description
Bluetooth version 3.0
Support profile Headset Profile, Hands-Free Profile,Advanced Audio
Distribution Profile
Operating range Up to 10 meters
Standby time Up to 140 hours*
Talk time Up to 4 hours*
Play time Up to 3.5 hours*
Charging time Approximately 2 hours
* Depending on the phone type and usage, the actual time may vary.
Frequently asked questions
The headset does not
The headset and the travel adapter may not have been
fully charge. connected properly.
Separate the headset from the travel adapter, reconnect,
and charge the headset.
I cannot use all the Available features may vary depending on the connected
features described in device. If your headset is connected to two devices at once,
the manual. some features may be unavailable.
Will my headset work
Your headset will work with devices that support your
with laptops, PCs, and
headset's Bluetooth version and profiles.
PDAs?
Why do I hear an echo Adjust the headset volume, or move to another area and
while on a call? try again.
Why do I hear static Appliances such as cordless phones and wireless
or interference while networking equipment may cause interference, which
on a call? usually sounds like static. To reduce any interference, keep
the headset away from other devices that use or produce
radio waves.
Will my headset Your headset produces significantly less power than a
interfere with my typical mobile phone. It also only emits signals that are
in compliance with the international Bluetooth standard.
car's electronics,
Therefore, you should not expect any interference with
radio, or computer?
standard consumer-grade electronics equipment.
Can other Bluetooth When you pair your headset to your Bluetooth phone,
phone users hear my you are creating a private link between only these two
conversation? Bluetooth devices. The wireless Bluetooth technology used
in your headset is not easily monitored by third parties
because Bluetooth wireless signals are significantly lower
in radio frequency power than those produced by a typical
mobile phone.
How do I clean my
Wipe it with a soft dry cloth.
headset?
-5-
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types
of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
This EEE is compliant with RoHS.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
The marking on the battery, manual or packaging indicates that the
battery in this product should not be disposed of with other household
waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66.
The battery incorporated in this product is not user replaceable. For
information on its replacement, please contact your service provider.
Do not attempt to remove the battery or dispose it in a fire. Do not
disassemble, crush, or puncture the battery. If you intend to discard the
product, the waste collection site will take the appropriate measures for
the recycling and treatment of the product, including the battery.
Warranty and parts replacement
Samsung warrants this product as free of defects in material, design and workmanship
for the period of one year from the original date of purchase.*
If during the period of warranty this product proves defective under normal use and
service you should return the product to the retailer from whom it was originally
purchased or a qualified service centre. The liability of Samsung and its appointed
maintenance company is limited to the cost of repair and/or replacement of the unit
under warranty.
• The warranty is limited to the original purchaser.
• A copy of your receipt or other proof of purchase is required for a proper warranty
service.
• The warranty is void if the product label is removed, or if the product has been subject
to physical abuse, improper installation, modification, or repair by unauthorised third
parties.
• Specifically exempt from any warranty are limited-life consumable components such
as batteries and other accessories.
• Samsung will not assume any responsibility for any loss or damage incurred in
shipping. All repair work on Samsung products by unauthorised third parties voids
any warranty.
* Depending on your region, the length of warranty may vary.
Declaration of Conformity (R&TTE)
We, Samsung Electronics
declare under our sole responsibility that the product
Bluetooth Headset: HM3300
to which this declaration relates, is in conformity with the following standards and/or other normative documents.
SAFETY EN 60950 - 1 : 2006 + A1:2010
EMC EN 301 489- 01 V1.8.1 (04-2008)
EN 301 489-17 V2.1.1 (05-2009)
RADIO EN 300 328 V1.7.1 (10-2006)
We hereby declare that [all essential radio test suites have been carried out and that] the above named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK*
2012.06.20
(place and date of issue)
* It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the
retailer where you purchased your product.
Copyright
Copyright © 2012 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or transmitted in
any form or by any means, electronic or mechanical, including photocopying, recording,
or storing in any information storage and retrieval system, without the prior written
permission of Samsung Electronics.
Trademarks
• SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics.
• Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More
information about Bluetooth is available at www.bluetooth.com.
• All other trademarks and copyrights are the property of their respective owners.
-6-
Joong-Hoon Choi / Lab Manager
(name and signature of authorised person)