Dell UltraSharp U2515H User Manual page 46

When the monitor enters the Power Save Mode, the following message appears:
Dell UltraSharp U2515H
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, one of the following messages
will appear depending on the selected input:
HDMI (MHL)/mDP/DP input
Dell UltraSharp U2515H
or
Dell UltraSharp U2515H
If either HDMI (MHL), mDP or DP input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
or
46
| Operating the Monitor
Entering Power Save Mode.
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press
the monitor button now to select the correct input source on the
On-Screen-Display menu.
There is no signal coming from your device. Please activate your device to
wake it up. If there is no display, press the monitor button now to select
the correct input source on the On-Screen-Display menu.
Dell UltraSharp U2515H