Safety Instructions - KingCraft KSC-360L User Manual

Lithium-ion cordless screwdriver
Table of Contents

Advertisement

US
2
4
5
6
13
1
3
Parts list
1.
Bit holder
2.
Housing
3.
Elektromotor
4.
Lithium-Ion battery 3.6 V
5+6. Switch
Kingcraft

1. SAFETY INSTRUCTIONS

Warning! Always read the instruction for electrical products carefully before use. It
will help you understand your product more easily and avoid unnecessary risks.
Keep this instruction manual in a safe place for future use.
The following symbols are used in these instructions for use:
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Read instructions carefully
Left and right rotation
This symbol designates that this tool is listed with both Canadian and U.S.
requirements by Underwriters Laboratories.
General safety instuctions
Warning! Read all instructions. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below
refers to your operated (corded) power tool or battery operated (cordless) power tool.
Save These Instructions!
1) Work area
a.
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools create sparks which may ignite the dust
or fumes.
c.
Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
Kingcraft
US
2

Advertisement

Table of Contents
loading

Table of Contents