Summary of Contents for KingCraft KSC-360L
- Page 1 Users manual US Subject to change KSC-360L Lithium-Ion Cordless Screwdriver 3107195 Art.No. CDM6056 www.ferm.com 0611-27...
- Page 2 Kingcraft Lithium-Ion Cordless Screwdriver 7. GUARANTEE Table of contents: Page: The guarantee conditions and contact information (service and customer assistance) can be found on the separately enclosed guarantee card. Safety instructions Assembly instructions It is our policy to continuously improve our products and we therefore reserve the right to Operation change the product specification without prior notice.
-
Page 3: Safety Instructions
There is an increased risk of electric shock if your body is Lithium-Ion battery 3.6 V 5+6. Switch earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will Kingcraft Kingcraft... - Page 4 If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting Kingcraft Kingcraft...
- Page 5 Liquid ejected from the battery may cause irritations or burns. Service Please use a qualified expert who uses original replacement parts to repair your power tool. This will ensure proper functioning of the power tool. Save These Instructions! Fig.4 Fig.5 Fig.6 Fig.7 Kingcraft Kingcraft...
- Page 6 Extension piece Electrical safety When using electric tools, always observe the local regulations relating to fire risk, electric shock and injury. In addition to the following instructions, also read the safety regulations in the Fig.1 relevant special section. Kingcraft Kingcraft...
-
Page 7: Technical Specifications
11. Never throw the accumulator block into water or a fire – it may explode. 12. Turn the drill immediately off after the screw is fastened. Overloading and damaging the battery or motor can be prevented this way. Use the torque to loosen the fastened screw. Kingcraft Kingcraft... -
Page 8: Operation
The screwdriver is fitted with an automatic spindle lock feature. When the On/Off switch (2) is This Kingcraft tool has been designed to operate over a long period of time with a minimum of not pressed, the spindle is locked. Now it is possible to use the screwdriver (even when the maintenance.