Intended use 3. Personal safety Your Black & Decker sander has been designed for sanding a. Stay alert, watch what you are doing and use common wood, metal, plastics and painted surfaces. This tool is sense when operating a power tool. Do not use a power intended for consumer use only.
Vibration f. Keep cutting tools sharp and clean. Properly maintained The declared vibration emission values stated in the technical cutting tools with sharp cutting edges are less likely to bind data and the declaration of conformity have been measured in and are easier to control.
Page 8
Assembly Tip of the sanding base (fig. G) Warning! Before assembly, make sure that the tool is When the sanding base tip (19) is worn, it can be reversed or switched off and unplugged. replaced. When the tip holder is worn, it can be replaced. Spare parts are available from your Black &...
The additional piece of velcro fastener (23) can be attached to Do not exert too much pressure on the tool. the top surface of the louvre attachment to allow for sanding Regularly check the condition of the sanding sheet. ...
Guarantee Separate collection of used products and packaging allows materials to be recycled and used again. Black & Decker is confident of the quality of its products and Re-use of recycled materials helps prevent offers an outstanding guarantee. This guarantee statement is environmental pollution and reduces the demand for in addition to and in no way prejudices your statutory rights.