HP Pavilion dv9000 Maintenance And Service Manual page 72

Remove the display assembly (3).
8.
If it is necessary to replace the display bezel or any of the display assembly internal components,
9.
remove the following screw covers and screws:
(1) Three rubber screw covers on the display bezel top edge. The display rubber screw covers are
included in the Rubber Kit, spare part number 448017-001.
(2) Two rubber screw covers on the display bezel bottom edge.
(3) Five Phillips PM2.5×8.0 screws.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
10.
bezel until the bezel disengages from the display enclosure.
Remove the display bezel (3). Display bezels are available using the following spare part
11.
numbers:
447997-001 (for use only with computer models equipped with a camera)
●
447996-001 (for use only with computer models not equipped with a camera)
●
64 Chapter 4 Removal and replacement procedures ENWW