Superior Fireplaces VRL4543ZMN Installation And Operation Instructions Manual page 23

CHILD SAFETY LOCK-OUT
This function lets you deactivate the remote
control buttons. It is active when the lock icon
is lit on the display.
To activate, press MODE button and UP ar-
row button at the same time. To deactivate,
press again.
ON
Figure 38 - Child Safety Lock-Out
LIGHT CONTROL
The control of lighting output can be adjusted
to six different levels. To activate this function
use the mode key (see Figure 34, page 22)
to index to the icon (Figure 39).
Use the up/down arrow keys (Figure 34, page
22) to turn ON/OFF or adjust the light level
(Figure 40). a single ''beep'' will confirm the
reception of the command.
Figure 39
Figure 40
126861-01A
OPERATION
Continued
www.SuperiorFireplaces.US.com
PROGRAMMING REMOTE CONTROL TO
RECEIVER
If your remote ever needs to be replaced you
will not need to replace the receiver.
To program receiver with a new hand-held
remote, insert a small pin or paper clip into
hole on receiver face plate marked PRG.
The receiver will beep 3 times to indicate it
is ready to accept a new remote transmitter.
Press the ON/OFF button on your remote
and the receiver will beep 4 times to confirm
it receives commands from the new remote.
ON REMOTE OFF
Figure 41 - Programing Remote Control
to Receiver
To Program Receiver
PRG
23