Returning To A Pre-Marked Position - Canon MVX45i Instruction Manual

Returning to a Pre-marked Position

If you wish to return to a particular scene
later, mark the point with the zero set memory
and the tape will stop at that point when you
rewind/fast forward the tape.
This function is operated with the wireless
controller.
CAMERA
1. Press the ZERO SET MEMORY button at the point you wish to return
to later.
• "0:00:00
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, rewind the tape.
• " " appears.
• The tape stops automatically at "0:00:00
• The tape counter changes to time code.
If the time code has not been recorded consecutively, the tape may not stop
correctly at the scene marked with the zero set memory.
Downloaded From VideoCamera-Manual.com Manuals
86
PLAY (VCR)
" appears.
REW
button
ZERO SET
MEMORY
button
CARD CAMERA
".
PLAY
button
STOP
button
CARD PLAY