NETGEAR EX6200 Product Manual page 11

2. Connect your printer's USB cable to the extender's USB port.
USB 3.0 port
3. Visit
www.netgear.com/readyshare
Printer utility for Windows or Mac.
4. Install the ReadySHARE Printer utility.
After you install it, the utility displays as NETGEAR USB Control
Center on your computer.
5. Launch the NETGEAR USB Control Center.
A list of available printers displays. If this is the first time you are
running the utility, you are asked to select a default printer.
6. Select a printer and click the Connect button.
Whenever you want to print, open the NETGEAR USB Control
Center and make sure your printer status says available. To print
from other devices, repeat this setup process for each of them.
and download the ReadySHARE
11