Disassemble Process - ViewSonic VP950b Service Manual

9. Disassemble Process

9.1 Units Disassemble Process
9.1.1 Tools
9.1.2 Disassemble process
1、 Tide up the worktable, spread straight cushion, put the monitor on it, the front side
adown.(Picture 1)
2、 Disassemble the 4 screws that fix the stand, remove the stand. (Picture 2, 3)
3、 Use equipment or abandoned IC card to prize up the bezel through the bottom flute,
and rip up the back cover downwards. refer to the following the picture 4,5, 6,7
4、 Remove the bezel, refer to the following picture 8,9.
5、 Disassemble the 4 pins of the backlight, as showed in the following the picture
1011,12.
6、 Disassemble the 4 fixed screws of the panel, as showed in the following the
picture13 ,14.
7、 Lift up the main frame and lift down the FFC connectors according to the direction of
the arrowhead, refer to the following picture 15,16.
8、 That's all. The disassemble process of the unit is over.
9.1.3 Show pictures
（Picture 1）
ViewSonic Corporation
：
Confidential - Do Not Cop
Glove
Big cross screwdriver
Small cross screwdriver
Prize equipment or abandoned IC card
Screw box
Cushion
Six angle sleeve spanner
- 70 –
（Picture 2）
VP950b