Table of Contents
Advertisement
4
Getting Started
Getting Started
1.
Peel away the tab from the back of
the iPad sleeve. Line up your iPad
with the sleeve, making sure that
the rear camera lines up with the
corresponding hole in the iPad case.
2.
Insert the iPad into the sleeve, and
secure it by reattaching the tab to
the back of the sleeve.
3.
To convert the case to a stand for
viewing and working, open the folio
so the iPad is at a right angle to the
keyboard.
4.
Pull the bottom of the iPad away
from the case, so it leans securely
against the keyboard.
(Figure 3)
5.
Remove the keyboard from the
case if you want to control the iPad
remotely, or if you want to pair the
keyboard with a different Bluetooth
device. You can use the keyboard
from up to 33 feet (10 m) away.
To remove the keyboard, pull out
the tab located near the power
switch, and pull the keyboard
out of the sleeve.
Figure 3
(Figure 4)
Figure 4
When replacing the keyboard
in the case, make sure to fit
the tab behind the keyboard
to hold it in place.
Advertisement
Table of Contents
