Table of Contents
Advertisement
4
Getting Started
Getting Started
1.
Match up the iPad's headphone
jack and dock connector port with
the corresponding cutouts on the
case
.
(Figure 3)
2.
Place the iPad facedown into
the case and press firmly on the
corners until secure.
3.
Remove the iPad from the case by
gently pulling on the corner of the
case nearest the camera. The iPad
will separate from the case and
you will be able to pull it out easily.
4.
To convert the case to a stand for
viewing and working, place the
iPad in the well and gently let go.
The case supports both landscape
and portrait positions.
Figure 3: Headphone jack
5.
If you want to adjust the viewing
angle, pull up the integrated
kickstand and set its rear feet in
the appropriate notches.
When you are ready to store the
iPad, make sure to return the
kickstand to its flat position.
Note: When setting up the
iPad in portrait position, be
sure to use the kickstand to
provide adequate support
(Figure 4).
Figure 4: Kickstand
Advertisement
Table of Contents
