Table of Contents
Advertisement
Installing the Focus Display in JAWS 10 or Earlier
To add support for the Focus 40 Blue in JAWS 10 or earlier, do the
following:
Note: Disconnect the Focus display from your computer when
performing the following steps. Having the display connected
during this process results in improper installation and failure of
the display to operate properly.
1.
Insert the Focus 40 Blue Companion CD. When the Freedom
Scientific Focus Setup dialog box opens, choose Install Windows
driver. You will hear a series of clicks as the driver is installed.
2.
When the installation completes, choose the OK button to restart
your computer.
3.
After the computer restarts and JAWS loads, establish a USB
connection between the Focus and computer.
4.
Windows will detect the display and install the appropriate
drivers.
Note: Windows XP will display a Found New Hardware Wizard,
prompting you to locate the driver. Choose the option to
automatically install the software then select Finish to complete
the installation.
5.
Quit and then restart JAWS. Your new Focus 40 Blue braille
display operates properly.
15
Advertisement
Table of Contents
