Open-Box Check And Cable Connections; Open-Box Check; Frame Installation - NightWatcher HVR5006D-E User Manual

2.1 Open-Box check

When you receive your NightWatcher D1 CCTV kit, please check the contents.
Firstly, please check whether there is any visible damage to the package appearance. The packaging materials
used for the CCTV kit are designed to protect most accidental knocks during transportation.
Then, please open the box and remove the plastic protective materials. Check whether there is any visible
damage to the DVR appearance.
(1).Front panel and rear panel
♦
The function buttons on the front panel and the interface specification on the real panel are as outlined in
the prodsuct specification.
♦
Please check the product description on the front panel is in accordance with the product type ordered.
The label on the base of the DVR is very important for after sales service. Please protect it carefully. When
you contact our customer service, please provide the product type and serial number on the label.
(2). DVR internal (only required if DVR is supplied without Hard Disk)
In addition to checking whether there are obvious signs of damage, please ensure there are no damaged or
loose cable connection.

2.2 Frame installation

The specification of the DVR is a standard 1U. It can be installed in a standard frame.
Installation recommendations:
1、Ensure the housing temperature is <35℃.
2、Locate the DVR at least 15cm away from other equipment.
3、Frame installation from bottom to top.
4、If installing multiple components in the frame, take precaution to avoid any capacity overload.

2. Open-Box check and cable connections

NightWatcher D1 Digital Video Recorder User Manual
7