Correcting Keystone Distortion And Automatic Positioning - Panasonic PT-L735NTU Operating Instructions Manual

Correcting keystone distortion and
automatic positioning (AUTO SETUP)
This projector detects its degree of tilt and the input signal. Keystone distortion and the
position of the image can then be corrected automatically in accordance with the input signal.
POWER AUTO SETUP AUTO SETUP
RGB LASER
VIDEO MENU
PAGE
Projector control panel
If you press the AUTO SETUP button, the items given in the table below will
be set automatically in addition to keystone distortion being corrected. The
setting details change according to the signal which is being input.
Input signal
POSITION, DOT CLOCK, CLOCK PHASE
RGB signals (If the dot clock frequency is 100 MHz or higher, the DOT
CLOCK and CLOCK PHASE will not be set automatically.)
NOTE:
B If the edges of the projected picture are indistinct, or if a dark picture is being
projected, the automatic setup processing may stop automatically before it is
complete. If this happens, project a different picture and then press the AUTO
SETUP button once more, or make the above adjustments manually.
B Set AUTO KEYSTONE in the OPTION menu to "OFF" to prevent any
deterioration of the picture as a result of keystone correction. (Refer to page 45.)
B Keystone distortion may not be corrected enough depending on the adjustment of
the zoom ring. In this case, adjust the KEYSTONE option. (Refer to page 41.)
Press the AUTO SETUP button.
(When the projected image has caused keystone distortion)
Screen
Projected
image
B Automatic positioning
will be carried out.
Contents set up automatically
[
Page
40,
41
E -27
NGLISH