Connect Your Speedstream 5200 Series Bridge - Efficient Networks SpeedStream 5200 Series Quick Start Manual

Connect Your SpeedStream 5200 Series Bridge

Connect Your SpeedStream 5200 Series Bridge
Connect Your SpeedStream 5200 Series Bridge Connect Your SpeedStream 5200 Series Bridge
1 Place your bridge in a location where it will be well ventilated. Do not stack
it with other devices or place it on carpet.
2 Connect the bridge to your PC, using the red cable between the bridge's
Ethernet port and the Ethernet port on your PC.
3 Connect the bridge to your DSL wall jack, using the purple label cable
between the bridge's DSL port and the DSL wall jack.
4 Connect the bridge to an AC power outlet using the supplied power cord.
5 Switch the bridge ON.
The following illustration shows the SpeedStream 5200 Series Bridge when
connected:
Connect Your SpeedStream 5200 Series Bridge
Caution: To reduce the risk of fire, use only no. 26
AWG or larger telecommunications line cord.
This cord is used to connect your bridge's DSL
port to the DSL wall jack.
SpeedStream 5200 Series Bridge
CONSOLE
5 5 5 5